Common Types of Arborist Reports: Know When to Cut or Keep Trees

Trees in Perth

Trees in PerthMajority of the local councils in Australia will require you to submit an arborist report if you are planning a project that may displace or affect trees. These reports are likewise required to obtain a Tree Permit Application, or to request for rejecting one.

Below are the most commonly requested types of arborist reports:

Pre-Development Evaluation

This is prepared in a development’s pre-planning stages to identify the affected tree’s value of retention. This will give you an idea of the trees you should keep or request for removal.

Tree Management Plan

This report is for commercial properties, schools, and golf courses with plenty of mature trees. When supervising a development site, you are responsible for providing a safe environment for the construction staff, as well as the future site users.

A solid TMP report by professional tree surgeons will determine trees that can pose hazards. As explained by the Perth-based tree surgeons of BeaverTree.com.au, this will provide you with better plans for managing these trees.

For instance, some trees may require removal, while others can possibly obtain lower risk ratings by implementing proper tree management protocols. The report will recommend the appropriate practices for trees that you will maintain on the property.

Development Application Reports

This report addresses concerns on the appropriateness of your proposal concerning the trees in the project site. This can provide recommendations on changing your proposed construction procedures. Based on your proposed design, you can work with the trees in the property and request for the removal of trees that might be hazardous.

Tree Risk Assessment

This will evaluate tree risk ratings and propose safety recommendations for the site. Contractors may use this to justify tree removal to local councils with strict regulations.

Experienced tree surgeons recommend getting an arborist report while you are in the early planning stages of a project. This will determine all tree-related limitations that may come up later on, so you can avoid penalties.